19
A-QAMOS-4CI
Part N
o
: 5102.81
SAT-TV Transmodulator
DVB-S/ -S2 (8x QPSK/ 8PSK)
→
4x CI
→
DVB-C (8x QAM)
A
LINE
Specifically, the following can be configured:
GUI settings
Help information within the status line of the browser
By default, the online help is displayed in an orange text box at the bottom of the
page. If you click this option, the help texts are displayed in the status bar of your
browser. Depending on your browser sometimes such use has to be allowed in
the browser settings.
Display all system files
The default is, that the system files can be subjected to upload or download as
a package under “Backup“ in the submenu “System administration“. By clicking
this box, the system files are listed individually and can be individually subjected
to an up or download.
Display top line register
By default, the registers are shown in the upper part of the user interface, to move
more quickly to the most frequently used menus. By removing the box marking
the registers are hidden.
Display start page
The default is to start with the menu selection by the command buttons after eve-
ry restart of the user interface (see chapter 7.1), where you can select the desired
setup menu. If this item is disabled, this page will be skipped and you reach in-
stantly the “Overview“.
Display status on right
By clicking the box, the status of the channels or the system is shifted to the right
of the user interface.
Optimization for low-speed data connectivity
By clicking the box the data volume of the browser pages is greatly reduced.
So it is possible to adjust the device, if there is only a low-speed connectivity
(GSM). The restictions are: there are no wizard and no program respective trans-
ponder lists. Furthermore, the size of all pictures is reduced.
Output frequency raster
With this selection box you can set the output channel spacing, which is pre-set
for adjustment of the QAM channels. To choose there are the standard B/G ra-
ster, the standard G raster (continuous 8 MHz) and the channel spacing of the
cable company Kabel-Deutschland-Gesellschaft (KDG).
Fan mode
This selection field you can specify whether the internal fans of the device are
be operated in accordance with the implemented control or whether they perma-
nently are on.
Tag selection (for decoded pid)
By click there is the possibility that in the PMT processing the CA descriptor is
replaced by a self-selected user-defined descriptor of the range 0x00 .. 0xFF. The
default value is 0xFE (see Section 7.3.3)
Activate user and keyword check
This selection is only available if you are logged in as administrator. If the box is
disabled, the log-in is skipped after each GUI reboot. Otherwise, user login and
password are required (see chapter 7.1).
SBL head end
All A-LINE-SBL and SBL devices, which are located in the same network, are
listed. By pressing the “Search“ button the list is updated. All marked devices
belong to the head end are displayed on the “Overview“ page.
