12
A-QAMOS-4CI
Part N
o
: 5102.81
SAT-TV Transmodulator
DVB-S/ -S2 (8x QPSK/ 8PSK)
→
4x CI
→
DVB-C (8x QAM)
A
LINE
If the point “unicable“ is selected for one or both satellite ports, the input mask is
expanded by the unicable settings. If only one satellite port is set to unicable, the
settings for the other port is disabled and grayed out. For an active unicable port
the other settings are inactive and grayed out.
First for a maximum of 8 satellite accesses the input of the corresponding LNB
oscillator frequency and a freely selectable name for each satellite level is done. This
name is then found in the “Adjustment“ menu (see also section 7.3.5) again, because
in the case of unicable use, you have to enter the corresponding satellite level in the
downlink frequency input field, that is identified by this name. Next, for the up to 8
resulting user bands the intermediate frequency must be entered, on which the uni-
cable module converts the respective satellite transponder. These values, which are
given in the documents of the unicable module, have to enter, then confirm by pres-
sing the “send“ button. The trouble-free functionality was tested using the SUS 4481 F
unicable module of the company Spaun. For stable operation, we recommend using
a separate power supply for these modules. Trouble-free operation can not be gua-
ranteed when using other unicable assemblies.
If unicable is not used on an input port, in the right part of the GUI a table of available transponders, which is updated according to
the selected satellite, band and polarization, appears. The transponders are listed by name, downlink frequency, sat-socket assign-
ment and contained programs. This is based on an internal database with the current assignments of the satellite transponder positi-
ons Astra 19.2° East, Eutelsat 13° East and Eurobird 9° East.
If the transponder allocations should change, you can customize this table and even edit. By double-clicking the relevant transponder
number you entry into the edit menu and can change the data accordingly.
Existing entries can be changed or new ones are attached. By clicking the appropriate box the program list of the transponder can be
deleted and changed or additions can be stored into the database permanently. If the box “Save entries“ is not clicked, the changes
will remain only as long as the user interface is open. With the next start of the user interface the changes are lost. In this simple way,
the program data is kept up to date.
