17
A-QAMOS-4CI
Part N
o
: 5102.81
SAT-TV Transmodulator
DVB-S/ -S2 (8x QPSK/ 8PSK)
→
4x CI
→
DVB-C (8x QAM)
A
LINE
CAT processing
selection: on, on with CA filter, off
CA system ID
adjustment range: 0...65535
Operator ID
adjustment range: 0...65535
LCN processing
selection: on, off
Standard SD
selection: IEC 62216, NorDig (V1)
If the LCN processing was turned on, you can switch to LCN editor by pressing the “Editor“ button to make the necessary adjust-
ments (see chapter 7.3.12).
In the table “Program filter“, the program filter function of the channel can be executed. If the program filter is turned off, all programs
of the received transponder can be transmitted. At the left of the overview all programs with the associated service ID are listed. To
the right is one check box to tag the program. In the right part of the overview there is the selector of the filter activation at the top. In
the second box “Filter mode“, you choose whether the selected channels are blocked or allowed to pass. In the box “Information of
other transponders“, it may be selected if additional information about SDT data from other transponders, which are transferred in the
data stream under the “Other“, are filtered out or are transmitted. Possible EPG information from other transponders, which can also
be transferred under the “Other“ in the data stream, are always transmitted with. With the first of the 4 buttons right below the current
program list can be loaded, the other 3 are used to simplify the selection of the program list
7.3.6 Menu ”Language”
In this menu, the selection of the user interface language is executed. You can choose between German and English. The transition
can be made either to the left in the navigation tree in the subtree of the point “language“ or top right of the language selection box.
