15
A-QAMOS-4CI
Part N
o
: 5102.81
SAT-TV Transmodulator
DVB-S/ -S2 (8x QPSK/ 8PSK)
→
4x CI
→
DVB-C (8x QAM)
A
LINE
7.3.4 Menu ”Transponders”
In this menu, the transponder selection, and so the program selection too, is done for all output channels. The user interface is divi-
ded into three tables. To the left there is the list of the selectable satellite transponders. This list results automatically from the selected
satellite setting (see chapter 7.3.2). The transponders are listed with their name, the downlink and the input allocation. In the middle
there is the current transponder allocation of the 8 channels, where on left side there is the selected satellite transponder and on right
side there is the corresponding output channel. Outside right next to the output channel there are two selectors: with the first the RF
signal of the respective channel is turned on or off, with the second you can select one of the 8 channels for setting. In the right table,
the television and radio programs, that are transmitted on the selected channel, are listed with their name and service ID.
To make changes, you must first select the desired channel. This is done either by clicking the appropriate selector outside right next
to the output channel in the middle of the channel list or by clicking “Channel“ in the navigation tree on the left side, which is listed as
a point of the menu “Transponders“.
If you want to change the input settings, one marked the first desired transponder with a single click in the left table. By pressing the
button “>“ left next to the input transponder in the middle of this overview, the transponder is adopted into the channel. At the same
time the channel assignments associated with the service ID and filter check box is listed in the right table. With this box you can
select which channels of the transponder are transmitted and which are filtered out of the package. To transmit a program, it must be
selected in that box. If you want to change the output channel, so you click the select box in this channel and selects the desired out-
put channel. On double assignments within these 8 channels is called attention to this automatically. Clicking the “Send“ button, the
settings are taken and stored.
