Blackmagicdesign teranex mini, Инструкция по установке и эксплуатации

Страница: 43 / 657

Teranex Mini - 12G-SDI to Quad SDI
Teranex Mini 12G-SDI to Quad SDI lets you convert a 12G-SDI signal to quad link SDI so you can
connect to Ultra HD equipment that use four separate BNC connectors. This conversion is
perfect if you need to connect 12G-SDI Ultra HD signals to four separate HD monitors, for
example large video wall displays. Your Teranex Mini includes a 12G-SDI loop through
connector and support for both level A and level B 3G-SDI equipment.
Connectors
1 Mini-B USB Port
The USB port lets you connect your converter to a Mac OS X or Windows computer so
you can adjust settings and update your converter’s internal software.
2 Switches
Switches on the front of your Teranex Mini let you change settings using the
tip of a pen.
3 LED Status Indicator
The LED glows white when the converter is receiving power and green when a valid
video input signal is detected. When more than one Teranex Mini is connected to your
computer, you can identify your converter using the ‘identify’ checkbox in Blackmagic
Teranex Setup. When the checkbox is enabled, your converter’s LED will flash
on and off.
4 Power
Standard built in IEC C14 connector for 90 - 240 volt AC power supply.
5 SDI Out A
This BNC connector outputs the following signals:
‚
SD/HD-SDI
‚
Single link 3G-SDI
‚
Single link 6G-SDI
ETHERNET PoE+ 12G-SDI IN SDI LOOP OUT
A B C D
QUAD or DUAL LINK SDI OUT
12G-SDI to Quad SDI
1 2 3
ETHERNET PoE+ 12G-SDI IN SDI LOOP OUT
A B C D
QUAD or DUAL LINK SDI OUT
12G-SDI to Quad SDI
4 5
9 10 11
6 7 8
43 43 Teranex Mini - 12G-SDI to Quad SDI