Blackmagicdesign teranex mini, Инструкция по установке и эксплуатации

Страница: 38 / 657

Teranex Mini - Audio to SDI 12G
With Teranex Mini Audio to SDI 12G, you can embed two channels of analog audio, or four
channels of AES/EBU digital audio into any SDI video connection. You can use this Teranex Mini
to embed audio from equipment, such as audio mixers and analog decks, into SDI video
connections for use with SDI routers and decks. Additional SDI audio channels can be embedded
by daisy chaining another Teranex Mini Audio to SDI 12G to your converter’s SDI output.
Connectors
1 Mini-B USB Port
Connects to the Blackmagic Teranex Setup software via a Mac OS X or Windows
computer for adjusting settings and updating your Teranex Mini’s internal software.
2 Switches
Adjustable switches for changing settings.
3 LED Status Indicator
Glows white when the converter is receiving power and green when a valid video input
signal is detected. Will flash on/off to identify individual converters via Blackmagic
Teranex Setup.
4 Power
Standard built in IEC C14 connector for 90 - 240 volt AC power supply.
5 Optical S/PDIF Audio Input
S/PDIF Signal with TOSLINK Connector.
6 L – Unbalanced HiFi Analog Line Level Input
Unbalanced left channel analog audio input RCA connector.
7 R – Unbalanced HiFi Analog Line Level Input
Unbalanced right channel analog audio input RCA connector.
8 Ethernet PoE+
Connects to a network switch or computer so you can change settings using
Blackmagic Teranex Setup. The Ethernet port also supports power over Ethernet.
SDI IN
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
PUSH PUSH
OPTICAL
AUDIO
STEREO IN
L R
SDI OUT ETHERNET PoE+
1 2 3
SDI IN
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
PUSH PUSH
OPTICAL
AUDIO
STEREO IN
L R
SDI OUT ETHERNET PoE+
4
8 9 10 11 12
5 6 7
38 38 Teranex Mini - Audio to SDI 12G