Blackmagicdesign teranex mini, Инструкция по установке и эксплуатации

Страница: 60 / 657

The switch legend on the base of your converter gives you all the
information you need to change conversion settings.
Blackmagic Teranex Setup Settings
The Teranex setup utility can change all the same settings that are available using the switches,
plus additional settings. You can access these settings by moving between the ‘video,’ ‘audio,’
‘configure,’ and ‘about’ tabs.
The ‘about’ and ‘configure’ tabs are detailed in the ‘changing settings’ section in this manual.
The ‘video’ tab for Teranex Mini - HDMI to Optical 12G contains the following settings.
Video Processing Menu
‚
Conversion
Click on the ‘conversion’ drop down menu to select conversion settings for your SDI or
Optical output. Setting this to ‘auto’ will negotiate an optimum HD or Ultra HD resolution
with your source equipment based on its output capabilities, while ‘Force HD’ and
‘Force Ultra HD’ will output HD and Ultra HD video respectively, regardless of the HDMI
input. However, SD will remain SD.
‚
Frame Rate
When enabled, the frame rate feature tells your converter to detect a video source
using 60 frames per second and automatically convert it to 59.94 frames per second.
Select or deselect the checkbox to enable or disable the feature.
This feature is helpful when you want to connect an HDMI source outputting 60 frames
per second to SDI or Optical equipment using a standard HD 59.94 frames per
second format.
The ‘audio’ tab for Teranex Mini - HDMI to Optical 12G contains the following settings.
60 60 Teranex Mini - HDMI to Optical 12G