Blackmagicdesign teranex mini, Инструкция по установке и эксплуатации, Страница: 28 / 657

Video Processing Menu
This menu allows you to set the aspect ratio of down converted video. The options are
letterbox, anamorphic, center cut or no processing.
The ‘audio’ tab for Teranex Mini - SDI to Analog 12G contains the following settings.
Audio Output Menu
This menu allows you to select between analog, AES/EBU, and timecode audio outputs, as well
as which channels of your SDI audio input you wish to de-embed. You can also adjust the gain
on the audio output.
Your Teranex Mini will retain its last settings whether applied via switch, Smart Panel or Teranex
setup utility. If reverting to switch control after removing the Smart Panel or updating your
converter’s settings via software, you may need to toggle individual switches for new settings to
take effect.
Teranex Mini Smart Panel Settings
If you have installed the optional Teranex Mini Smart Panel on your SDI to Analog 12G converter,
the following menus will be available - ‘video,’ ‘audio,’ and ‘network.’ The settings available in
these menus are identical to those detailed in the ‘Blackmagic Teranex Setup settings’ section
above. For more information on changing settings using the Teranex Mini Smart Panel, refer to
the ‘changing settings’ section in this manual.
Using Teranex Mini Smart Panel gives you access
to the same settings as Blackmagic Teranex Setup.
Adjust your video luminance and chroma
levels and component chroma levels using
the ‘video’ settings page in Blackmagic
Teranex Setup. Adjust your analog audio levels and AES/
EBU levels using the ‘audio’ settings page.
28 28 Teranex Mini - SDI to Analog 12G