Blackmagicdesign teranex mini, Инструкция по установке и эксплуатации

Страница: 32 / 657

Video Processing Menu
This menu allows you to set up conversion options, dependent on your analog video input.
Component video inputs can be converted from SD to HD, and HD to Ultra HD. S-Video and
composite inputs can only be converted from SD to HD.
The ‘audio’ tab for Teranex Mini Analog to SDI 12G contains the following settings.
Audio Input Menu
This menu allows you to select between analog, AES/EBU, and timecode audio inputs, as well
as which channels of your SDI audio output you wish to embed these into. You can also adjust
the gain on the audio signal.
Selecting AES/EBU allows the additional option of checking ‘sample rate conversion.’ When
this is selected, the sample rate of your SDI audio output will be up- or down- converted to
24-bit, 48kHz.
Your Teranex Mini will retain its last settings whether applied via switch, Smart Panel or
Teranex setup utility. If reverting to switch control after removing the Smart Panel or updating
your converter’s settings via software, you may need to toggle individual switches for new
settings to take effect.
Teranex Mini Smart Panel Settings
If you have installed the optional Teranex Mini Smart Panel on your Analog to SDI 12G to converter,
the following menus will be available - ‘video,’ ‘audio,’ and ‘network.’ The settings available in these
menus are identical to those detailed in the ‘Blackmagic Teranex Setup settings’ section above.
For more information on changing settings using the Teranex Mini Smart Panel, refer to the
‘changing settings section in this manual.
Adjust your video luminance and chroma levels
and component chroma levels using the ‘video’
settings page in Blackmagic Teranex Setup. Adjust your analog audio levels and AES/
EBU levels using the ‘audio’ settings page.
32 32 Teranex Mini - Analog to SDI 12G