Blackmagicdesign teranex mini, Инструкция по установке и эксплуатации

Страница: 11 / 657

The configure and about tabs in Blackmagic Teranex Setup are common across all Teranex
Mini models.
Configure Tab
The ‘configure’ tab is the same for all Teranex Minis and contains your converter’s network
settings. Here you can toggle your converter between dynamic and static network addresses,
as well as set up the IP address, subnet mask, and gateway for your Teranex Mini. See the
‘changing network settings’ section for more detail.
Use the ‘configure’ tab in Blackmagic Teranex
Setup to access network settings.
About Tab
You can use the settings in this tab to name your Teranex Mini, and to identify individual converters.
To name your Teranex Mini converter, simply click in the ‘name’ text box and type your desired
converter name. Click ‘save’ to confirm the change. To easily identify your selected Teranex Mini
converter, click on the ‘identify’ checkbox. This will flash the multi use indicator on your converter’s
basic Teranex Mini panel. If you have a Teranex Mini Smart Panel installed, you will see the model
name in the LCD turn from grey to red. Deselect the checkbox to turn off the identification indicators.
The ‘software settings’ menu in the ‘about’ tab identifies which software version your Teranex
Mini is running. If your converter’s internal software is older than the current version that comes
with Blackmagic Teranex Setup, an update button will be present here that allows you to bring
your converter’s software up to date.
The ‘about’ tab in Blackmagic Teranex Setup is used to
name and identify your Teranex Mini. You can also check
the version of the setup software.
11 11 Changing Settings