Black+Decker BCD701, Руководство пользователя

Страница: 8 / 80

ENGLISH
8
(Original instructions)
to radio communications. However, there is
no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one of the
following meaures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)
Getting started
• The Micro USB port (12) on the
BLACK+DECKER GoPak 2 in 1 battery is
only to be used for charging the GoPak.
• The USB A port (11) on the
BLACK+DECKER GoPak 2 in 1 battery is
only to be used for powering USB
devices
(Phone/Tablet/MP3/Wearable/Game
Controller/etc.).
Fig. B
Charging the BLACK+DECKER GoPak 2 in 1
battery (Fig. C, D)
Warning : Never attempt to charge
the BLACK+DECKER GoPak 2 in 1
battery using the tool terminals on
the GoPak.
Warning : You should only charge
the BLACK+DECKER GoPak 2 in 1
battery using UL or CSA approved
USB ports rated for charging high
performance devices. The GoPak can pull
more current than acceptable with older
USB ports. An error message may display
on your computer if the computer is used to
charge the GoPak.
1. Plug the micro USB cable (included) (13)
into a USB power supply (not included).
2. Plug the micro USB plug of your charger
cord into the GoPak micro USB port (12).
3. As the GoPak charges, the state of charge
LEDs will illuminate. The illuminated
LED(s) indicate the state of charge of the
pack. The blinking LED indicates the next
level of charge in progress. The state of
charge button (9) is disabled during
charging only.
4. four LEDs turning off. Pressing the state
of charge indicator button (9) will
illuminate all four LEDs. The battery is
fully charged and may be used at this
time or left on the charger.
5. Recharge discharged batteries as soon as
possible after use or battery life may be
greatly diminished. For longest battery
life, do not discharge batteries fully. It is
recommended that the batteries be
recharged after each use.
Fig. C
State of charge indicator (Fig. D)
The BLACK+DECKER GoPak 2 in 1 battery is
equipped with a state of charge button (9)
with a four LED display.
The state of charge is an indication of
approximate levels of charge remaining in
the battery according to the following
indicators:
12
11
12
13
96-100% charged
76-95%
51-75%
26-50%
Pack needs to be charged