Black Box ServSwitch ACR9000A, Руководство пользователя

Страница: 28 / 80

27
CHAPTER 6: Initial Power-Up and Configuration
6. Initial Power-Up and
Configuration
6.1 Powering Up the Ultra Remote
If you haven’t already done so, run the ServSwitch™ Ultra Remote’s power cord
from the Ultra Remote’s power inlet to a working AC outlet. Move the rocker
switch on the Ultra Remote’s rear panel to the “|” position to turn the unit on. If
the green POWER LED on the front panel doesn’t light, turn the unit back off,
make sure your outlet is providing power, and wait at least 15 seconds before
turning power on again.
After the Ultra Remote completes a self-test and startup sequence, it displays the
connect-login screen, as shown in Figure 6-1. If you have used the video-loop cable
in a permanent local user-station installation (see
Chapter 5 ), your monitor might
remain blank for up to 25 seconds before a login screen appears.
If no login screen appears, check the cable connections as shown in Chapter 5 .
Figure 6-1. The connect-login screen.