Black Box ServSwitch ACR9000A, Руководство пользователя

Страница: 31 / 80

30
SERVSWITCH™ ULTRA REMOTE
6.4 Using the Configure Login for the First Time
You only need to set a few basic communication parameters in the Ultra Remote to
make it accessible to the Ultra Remote Viewer program you’ll install later.
Administrators can configure other settings, such as user management and
security, from the Viewer.
To configure the Ultra Remote for remote login through the Ultra Remote
Viewer program, give it a TCP/IP address as follows:
1. Press [F10] to display the gray configure-login screen (shown in Figure 6-3).
2. Login at the configure-login screen using “admin” as the user name (not case-
sensitive) and no password. The configure screen should appear (see
Section 6.5 ).
3. Enter the IP address, subnet mask, optional gateway address, TCP port (if
you’re using something other than 5678), and speed/duplex (if you’ve
connected the Ultra Remote to a LAN device that requires a particular data
rate or duplex setting).
4. Press [F10] to save the configuration data and return to the connect-login
screen. The changes take effect immediately.
Figure 6-3. The configure-login screen.