63
2.
Use the rotary knob to select the setting of
OFF
or
ON
.
3.
Use the
buttons to move the cursor to the
PROGRAM
selection and use the rotary knob to select a program between
1-9.
4.
Use the
buttons to move the cursor to the
EDIT
selection and press
. The following screen will be displayed:
5.
As described previously, each step has the following parameters
to be edited: step number, action, voltage, current, and time.
Use the
buttons to move the cursor to the desired
parameter and use the rotary knob or keypad (numeric values
only) to change the parameter values. Change the step value
and continue this procedure for each step for as many steps as
needed.
6.
Once an
END
action step is entered, pressing
will finalize
the program steps and the following will be displayed:
