43
21
Local/Analog
State
○
L
O
High: front panel controlled
Low: rear analog controlled
22 Ground
23 Ground
24
Current
Monitor
○
A
O
Output 0-5 V / 0-10 V represents power
supply output current, full scale input
equals maximum output current
Enabling/Disabling External Control
Follow the steps below to configure and enable the external control
interface.
1.
Press the
button and press the
button one time until
CONFIG
is blinking and press
.
2.
Press
button three times until
EXTCTRL
is blinking and
press
. Press
once again to select
ENABLE
.
3.
Use the rotary knob to select the setting of
ACTIVE-AMODE
or
ACTIVE-BMODE
from
NOT ACTIVE
and press
. If the enable
is set to
NOT ACTIVE
, all the external control as well as the
analog program control will be disabled.
4.
Press
several times to exit the menu setting.
AMODE
This mode allows
button to be output ON/OFF control. When
