55
2.
Press
button four times until
PARALLEL
is blinking and
press
.
3.
Press
to select the parallel
MODE
.
4.
Use the rotary knob to select the setting of
OFF
or
ON
and press
.
5.
Press
button one time until
ROLE
is blinking and press
.
6.
Use the rotary knob to set the master or slave
and press
.
Use the same procedure to set up
MASTER
,
SLAVE A
,
SLAVE B
,
or
SLAVE C
for the other power supplies.
7.
Press
several times to exit the menu setting.
Slave Unit
When a power supply is set up to be a slave unit, it will wait for the
master’s connection, as shown below.
If the master unit has found the slave unit, the slave unit will be
controlled by the master unit and the following will be displayed:
