37
4.
Use rotary to select the OCP ON or OFF followed by
.
5.
Use numerical keys directly or use
keys with rotary
adjustment followed by
to confirm the OCP value.
6.
Press
several times to exit the menu setting.
7.
If the OCP is on, the OCP LED indicator will be lit up.
When OCP protection is tripped during operation, the output will turn
off and the following OCP status message will display:
To clear the trip status, press
once.
Configure Overpower Protection (OPP)
The PVS overpower protection continuously monitors the output power
level. If it is greater than the OPP setting, it turns off the power supply
output to protect the device under test.
Follow the steps below to set the OPP limit:
1.
Press the
button and press the
button one time until
CONFIG
is blinking and press
.
2.
Press
button one time until
PROTECT
is blinking and press
. The display will then show
OVP
.
3.
Press
button two times until
OPP
is displayed.
