38
4.
Use rotary to select the OPP ON or OFF followed by
.
5.
Use numerical keys directly or use
keys with rotary
adjustment followed by
to confirm the OPP value.
6.
Press
several times to exit the menu setting.
7.
If the OPP is on, the OPP LED indicator will be lit up.
When OPP protection is tripped during operation, the output will turn
off and the following OPP status message will display:
To clear the trip status, press
once.
Configure CV to CC Protection
The PVS CV to CC protection monitors the transition between constant
voltage to constant current mode. If this event occurs, the output of the
power supply will turn off.
Follow the steps below to set the CV to CC limit:
1.
Press the
button and press the
button one time until
CONFIG
is blinking and press
.
2.
Press
button one time until
PROTECT
is blinking and press
. The display will then show
OVP
.
3.
Press
button three times until
CV to CC
is displayed.
