BK Precision 2194 Скачать руководство пользователя страница 111

Страница: 111 / 139

Save and Recall

Oscilloscope setups, waveforms, pictures, and CSV files can be saved to internal oscilloscope memory or to a USB storage

device. The saved setups, waveforms can be recalled later. The oscilloscope provides a USB Host interface on the front

panel to connect an USB device for external storage.

13.1 Save Type

The oscilloscope supports setups, waveforms, pictures and CSV files storage. The default save type is setups.

Setups

It’s the default storage type of the oscilloscope. It saves the settings of the oscilloscope in internal or external memory

in “*.SET” format. At most 20 setting files (from No.1No.20) can be stored in internal memory. The stored settings

can be recalled.

Reference

The oscilloscope saves the waveform data in external memory in “*.REF” format. The data of the channel is you

select channel. At recall, the data will be displayed on the screen by REFA or REFB.

BMP

The oscilloscope saves the screen image in external memory in “*.bmp” format. You can specify the file name and

saving directory under the same directory using the same file name. The recall of image is not supported.

JPG

The oscilloscope saves the screen image in external memory in “*.jpg” format. You can specify the file name and

saving directory under the same directory using the same file name. The recall of image is not supported.

PNG

The oscilloscope saves the screen image in external memory in “*.png” format. You can specify the file name and

saving directory under the same directory using the same file name. The recall of image is not supported.

Binary

The oscilloscope saves the waveform data in external memory in “*.BIN” format. The data of all the channels turned

on can be saved in the same file. The recall of binary is not supported.

CSV

The oscilloscope saves the waveform data in external memory in “*.CSV” format. The stored files contain the

waveform data of the displayed analog channels and the main setting information of the oscilloscope. The recall of

CSV file is not supported.
Set the save type to CSV, and set the Para Save option to On or Off to turn on or of the parameters storage function.

Matlab

The oscilloscope saves the waveform data in external memory in “*.DAT” format. The data of all the channels turned

on can be saved in the same file. The recall of Matlab file is not supported.

To Default Key

The oscilloscope saves the factory config and user set config. Then you can select the default function is the factory

config or user set config.

10.

Bin2CSV Tool

Download the tool and run it after decompressing on PC. The bin file of waveform data can be converted into a visual

CSV file.

Содержание 2194












































































































































Результаты поиска

Содержание 2194

Отзывы:

Похожие инструкции для 2194

Бренды по названию

Популярные бренды

BK Precision 2194, Руководство пользователя

Результаты поиска

Содержание 2194

Отзывы:

Похожие инструкции для 2194

Бренды по названию

Популярные бренды