7
www.bitrek.com.ua
[email protected]
+380 44 507 02 07
be removed (use of SIM-card with PIN-code can be allowed subject to
entering the PIN-code to the device settings).
To install the SIM-card disconnect the power socket from the device,
remove the side cover and install the SIM-card into the slot (see Figure 2).
Figure 2 - Installation of SIM-card into the device.
Connector for power supply and peripherals
The rear panel of the tracking device contains a socket for cable
connection. Connecting cable in turn has outlets for power, analog, digital,
discrete sensors and actuating mechanisms. Location and numbering of
contacts are shown in Figure 3.
Marking of connector pins for power supply, sensors and peripherals is
shown in Table 2.
Figure 3 - Location and numbering of contact elements.
