BITREK BI-520L TREK, Руководство по эксплуатации

Страница: 14 / 31

14
www.bitrek.com.ua
sales@bitrek.com.ua
+380 44 507 02 07
List of control commands to operate the device
Table 4 - List of control commands to operate the device
No. Command Description
Availability
of response
1 cpureset Reload of device processor No
2 rstallprof
Restoring of original state of profile
settings
No
3 deleterecords Deletion of all saved records No
4
setparam
####
Set the value of the parameter by ID Yes
5 boot #,#,# Update of device software Yes
6 setdigout #
Set the mode of operation of digital
output Out 1
Yes
7 ignitionoff
Activation of the safety locking of
ignition
Yes
8 ignitionon
Deactivation of the safety locking of
ignition
Yes
Notes to Table 4.
Reboot of device processor.
Command to be sent - cpurese t;
No response is returned for this command. Receipt of the command initiates a
complete restart of all device processes.
Restoring of original state of profile settings.
Command to be sent - rstallprof ;
No response is returned for this command. Receipt of this command initiates
reset of profile parameters to default ones.
Deletion of all saved records.
Command to be sent - deleterecord s;
No response is returned for this command. Receipt of the command deletes all
the data packets from the device memory.
Set the value of the parameter by ID
Command to be sent - setparam ####;
Parameter ID (####) consists of four digits and indicates the number of the
parameter. All configurable parameters are specified in the list of device
parameters (see
Appendix 1 and Appendix 2 ).