16
www.bitrek.com.ua
[email protected]
+380 44 507 02 07
activated if the speed according to GPS is less than 5 km/h.
Examples of response:
«Set RQS To Ignition On» - ignition switch on;
«Set RQS To Ignition Off» - ignition switch off;
Basic configuration
After installing the SIM-card of the mobile operator and connection of
the power supply, the device shall be configured to transmit data to the server.
All adjustable parameters of the device are divided into groups:
Server and GPRS.
Tracking.
Security.
Service.
Voice communication.
Roaming.
Setting required for basic operation of the device includes data
transmission and tracking. They are grouped in "Server and GPRS" and
"Tracking". After setting up the necessary parameters the device will transmit
data about its current location to the server.
All parameters available for configuration are specified in
Security settings
To meet the safety conditions, access to the configuration of the device
can be limited.
At connection your device to the PC using USB-UART converter, every
time you send a command, the device requires the access password. Standard
access code is 11111. Lifetime of password is 60 seconds. After this timeout
the password shall be re-entered. Access password can be changed by the
user (ID 0910, see
Format of sending a standard password to the device - TPASS: 11111;
Examples of response:
«TASK COM TERM: PASSWORD OK» - correct password is entered;
«TASK COM TERM: INCORRECT PASSWORD» - incorrect password is entered;
When sending commands via SMS, set the login and password of SMS access.
To set the login use ID 0252 parameter, to set the password use ID 0253.
To set the login and password, any SMS command shall have the following
structure to be sent:
