Bistos BT-770, Руководство по эксплуатации

Страница: 37 / 124

BT-770 Operation manual
36
P/N : 770-ENG-OPM-EUR-D03 Bistos Co., Ltd. 2018.05
3.4 Operation mode
The monitor has 2 operating modes, of which the demo mode is protected by a password.
1. Monitoring mode (operating mode)
This is the daily operating mode of patient monitoring; you can change some settings in
accordance with the patients, such as alarm limits. However, when the patient is discharged,
the monitor will restore these settings to default according to pre-set configuration.
2. Demo mode
This mode is protected by a password for demonstration purpose only.
• Enter the demo mode:

Select [Settings]Smart Hotkey or press [Setting] key on the monitor panel
→ “ Settings ” ;

Select
“
Demo Mode>>
” →
enter the password and confirm, and the monitor
enters the demo mode.
• Exit demo mode:

Select [Settings]Smart Hotkey or press [Setting] key on the monitor panel
→ “ Settings ” ;

Select
“
Exit Demo >>
”
and the monitor exits the demo mode.
WARNING

The demo mode is mainly used to show the monitor’s performance and for
user training. In actual clinical use, the demo function is prohibited in order to
avoid mistaking the displayed waves and parameters as those of the patient,
thus affecting patient monitoring, and delaying diagnosis and treatment.
3.5 Measurement setup
This section only describes the general settings of measuring wave in monitor mode; for other
specific settings of each parameter, please refer to the appropriate section.
Select the wave area of a parameter to enter the appropriate setup menu. The setup menu
defines the specific wave setup of the parameter, such as wave gain and wave speed. You may
set the waves of different parameters as needed.