INSTALLATION, OPERATION AND MAINTENANCE MANUAL
BiSolid Saver OM-BSSV00/08/2012/EN
31
Figure 12. Positioning of ash-tray and fire-grates for boilers from series BiSolid Saver A
operating with wood logs
Warning
When the boiler from series BiSolid Saver
А
, with constantly installed pellet
burner, is operating with wood logs, with closed boiler fuel feeding door, the fire-
grates are down and the ash-tray is positioned with its lower side towards the
burner.
Warning
Switching from wood logs to wood pellets, for boilers BiSolid Saver
А
with
constantly installed pellet burner, can be performed manually by switching on
the pellet burner. In this case before starting the pellet burner the user must
change the position of the fire-grates in the combustion chamber, as described
in Figure 11.
Warning
When operating with wood pellets the user must be familiar in details with the
BiSolid GP manual for installation, operation and maintenance.
Warning
Hot water boiler from series BiSolid Saver
А
are not designated for burning
coal.
When operating with pellet burner you have to first turn on the main switch button, which
powers the burner control panel.
Warning
It is strongly recommended that starting of the pellet burner is done by the key
“Start” located on the electrical control panel (Please read the operation,
installation and maintenance manual of the pellet burner).
Front fire-grate
position
Rear fire-grate
position
Ash-tray
position
