BiSolid Automat 25, Инструкция по установке, эксплуатации и обслуживанию

Страница: 52 / 76

INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Bisolid Automat OM-BAV05/02/2018/EN 52
6.11.4. COMMON SETTINGS
Table 14. Common settings of pellet burner
6.12. SMS COMMANDS
The GSM module is optional and it is connected to „CON7
”
of the indicaiion board. When
available, the GSM symbol appears on the indication. The SMS commands should be with
Latin letters using only capital or only small letters.
Example: BSTOP and bstop - correct, Bstop - wrong.
Table 15. Description of pellet burner GSM control commands
BSTOP and BSTART commands have the same effect as
ON / OFF button and when turned
on, the weekly program runs. In case of emergency, if no telephone number is recorded, a
check is performed for the last telephone number that has sent an SMS and if no such number
the notification is not sent. When SMS command is received, a reply SMS is sent to the
number that has sent the command.
Name Indication Limit Factory
settings
Delay of response of the flow
sensor In FC 1 – 240 s 30 s
Assignment of light sensor Fire set 0 – 99 % 30 %
Assignment pump switch on Tpump set 10 – 70 °C 40 °C
Pulse revolutions Fan1 pulse/rev 0 - 12
0 - inactive
1
Name Indication Action
Stop BSTOP Stops the burner - identical to ON / OFF button
Start BSTART Starts the burner - identical to ON / OFF button
Current status BINFO Sends an SMS with the current status
Emergency phone
number BPHONE Records the telephone number from which the
message has been sent and in case of missing
flame, missing air flow or activated blocking
thermostat sends a notification.
Common Settings
FC delay 30 s
Fire set 30 %
Tpump set 40 °C
Pulse/rev 0