WATER STRESS – PREVENTION BETTER
THAN CURE
As algae can diminish the copper levels in water it is
important to use the Boost function of the Bionizer to
compensate for periods of heavy rain, wind and/or
abnormal pool load (i.e. lots of bodies in the pool all day).
Use the Boost function if the Copper Ion levels fall to
0.3ppM or less due to any of these factors.
These conditions rapidly increase the amount of algae
spores that would normally find their way into your pool.
By doing this before or soon after the rain/wind/extra
load is experienced you are prepared for any increased
loading on your pool.
This action will exponentially reduce the chance of an
algal attack stemming from these conditions.
DON'T NEGLECT YOUR FILTER.
The filter's primary responsibility is to remove fine
suspended debris from the water.
If it is not maintained
properly, cloudy water will be a constant problem.
• Sand filters should have their media/sand replaced
every two or three years. Use Glass Filter medium for
swimming pool sand filters, as it is an excellent fine
micron media that will only require replacing every 6
to 8 years.
• When replacing the medium in the filter make sure
that all of the old medium is completely removed from
the filter. Up ending the filter and hosing out is one way
to ensure this. This is important! Take care not to
damage any laterals or seals inside the filter if
changing filter medium.
•
We don't recommend D.E. filters
as the medium can
double the number of anodes required for efficient
operation. And who needs the expense and hassle of
an “old school” D.E. filter anyway ?
• For Cartridge Filters clean cartridges regularly and
inspect for holes or wear. Regardless of the filter type,
damaged or missing gaskets or any incorrectly fitted
parts can be responsible for cloudy water.
Many water
quality complaints are finally traced to the pool's
filter.
REMEMBER WATER BALANCE.
Proper water balance is necessary for water health, clarity
and also water hue.
Maintain the pool water as outlined
in the Start-Up section.
We recommend the addition of a “pH Boss” to your pool.
pH problems and troublesome testing now disappear.
We also recommend the addition of an “Eco-Oxidizer” to
reduce the need to chemical oxidizers and help maintain
overall water balance and clarity.
SKIM THE SURFACE.
Use a surface skimmer net to collect all floating debris. A
leaf net works best for this particular task. This task can be
greatly minimized with a properly functioning pool
filtration system with adequate flow and a properly
functioning skimmer weir. This inexpensive device
increases the velocity of the surface water into the
skimmer; thereby ensuring its ability to remove surface
material from the pool, keeping it crystal clear. It acts as a
one-way street allowing debris in but not out. This device
is often underestimated. Installing one greatly reduces
the amount of time required to clean the pool properly
and keep it clean.
TIPS FOR KEEPING YOUR POOL CRYSTAL CLEAR
26
INSTRUCTION BOOK
