SELECTING OPERATING MODE
Set the Operating Mode to the way you want the Bionizer to work for you.
The following four operating modes are available on the
Bionizer.
!
Auto
..............Unit will operate the Pool Pump and
Ionizing outputs according to the Pool
Pump Timer sessions (page 14).
!
Manual On
....Overrides Pool Pump Timer Program, and
operates the pool pump continuously
whenever the Bionizer is switched on.
Ionizing time will restart at midnight each
night, or as soon as the Bionizer is first
switched on for the day.
Use this mode when operating the
Bionizer from an External timer (such as
C-Bus) or for solar powered installations.
!
Manual Off
....Overrides the Pool Pump Timer Program,
and switches the pool pump and ionizing
outputs off.
Use this mode when doing maintenance
such as cleaning out the pump hair and
lint pot etc, when the pump must not
start.
Caution : Be sure to return the Bionizer to
Auto or Manual On modes as required,
or your pool will not be filtered or
ionized, resulting in water that is unsafe
for swimming.
!
Boost
.............Unit operates the Pool Pump and Ionizing
outputs for a calculated number of hours
to boost Copper level. The number of
boost hours is calculated from the Pool
Size setting and the current Copper
reading. See the “
Using the Boost
Function
” on page 18 for instructions.
Selecting the required operating mode :
!
Short presses of the
button select
ON/OFF/AUTO
between the following Auto and Manual modes.
Auto
The display will show
Auto:On
or
Auto:Off
when this is
first selected, depending on the time of day and Pump
Timer settings.
Please note that “Auto:Off” only indicates that the
pool pump is switched off because it is currently not in
one of the Pool Pump timer cycles. This is NOT an
indication that the Bionizer is switched off.
Manual: On
The unit will show “
Manual:On
”, and the currently
selected output level (see page 14). When the Ionizing
Time is finished for the day, the unit will show
“
Ions:Off
”.
Manual: Off
The unit will show “
Manual:Off
” and and “
Ions:Off
”
Boost Mode
!
Press AND HOLD the
button for 4
ON/OFF/AUTO
seconds to select “Boost” mode.
!
Press AND HOLD the
button for 4
ON/OFF/AUTO
seconds to
EXIT
“Boost” mode.
!
See the “
Using the Boost Function
”
section on page 18
before using this feature.
15
