cessary requirements.
You can also...
• install the Dime Manager software, which provides more tools for working with your
device. This installation is optional and not essential for the configuration or operation of
the device.
4.3.1 Gathering data
You can gather the main data for configuration with the GUI quickly, because you do not
need any information that requires in-depth knowledge of networks.
In addition, you can have the device assign a valid IP configuration to all PCs, so time-
consuming configuration of your LAN is not necessary. If necessary, you can use the
sample values.
Before you start the configuration, you should gather the data for the following purposes:
• Basic configuration (obligatory if your device is in the ex works state)
• Internet access (optional)
• Wireless LAN (optional, only for bintec RS120wu , bintec RS230aw and bintec
RS232jw ).
The following tables show examples of possible values for the necessary data. You can
enter your personal data in the "Your values" column, so that you can refer to these values
later when needed.
If you configure a new network, you can use the given example values for IP addresses
and netmasks. In cases of doubt, ask your system administrator.
Basic configuration
For a basic configuration of your gateway, you need information that relates to your net-
work environment:
Basic information
Access data
Example value
Your values
IP address of your gateway
Netmask of your gateway
Internet access over ADSL
If you want to set up Internet access, you need an Internet Service Provider (ISP). You also
4 Basic configuration
bintec elmeg GmbH
52
bintec RS Series
