BinTec RS120, Справочное руководство

Страница: 221 / 573

Field Description
•
56 5%1 91
: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in decimal format).
•
56 @?%1 91
: Differentiated Services Code
Point according to RFC 3260 is used to signal the priority of
IP packets (indicated in hexadecimal format).
•
*- ;( 91
: The TOS value is specified in binary
format, e.g. 00111111.
•
*- 5%1 91
: The TOS value is specified in decimal
format, e.g. 63.
•
*- @?%1 91
: The TOS value is specified in
hexadecimal format, e.g. 3F.
Enter the relevant value for
56 ;( 91
,
56
5%1 91
,
56 @?%1 91
,
*- ;(
91
,
*- 5%1 91
and
*- @?%1
91
.
Mode Select when the interface defined in Route Parameters ->Inter-
face is to be used.
Possible values:
•
51+ 7
(default value): The route can be used if
the interface is "up". If the interface is "dormant", then dial and
wait until the interface is "up".
•
3
: The route can always be used.
•
51+ %
: The route can be used when the
interface is "up". If the interface is "dormant", then select and
use the alternative route (rerouting) until the interface is "up".
•
) 1+
: The route can be used when the interface is
"up".
•
317( 1+
: The route can be used when the interface
is "up". If the interface is "dormant", then dial and wait until the
interface is "up". In this case, an alternative interface with a
poorer metric is used for routing until the interface is "up".
bintec elmeg GmbH
11 Networking
bintec RS Series 207