Field
Value
switched line (dialup connection), this can cause additional
costs if the server is
2
for a long time.
The function is activated by selecting
7+
.
The function is enabled by default.
Retries
Enter the number of retries for cases when there is no response
to a request. If an response has still not been received after
these attempts, the Status is set to
2
. In Alive Check =
7+
your device attempts to reach the server every 20
seconds. If the server responds, Status is set back to
+
.
Possible values are whole numbers between
and
.
The default value is
. To prevent Status being set to
2
, set
this value to
.
RADIUS Dialout
Only for Authentication Type =
,3!*
and
* ,3!*
.
Select whether your device receives requests from RADIUS
server dialout routes. This enables temporary interfaces to be
configured automatically and your device can initiate outgoing
connections that are not configured permanently.
The function is activated by selecting
7+
.
The function is disabled by default.
If the function is active, you can enter the following options:
•
?+ +
: Enter the time period in seconds
between update intervals.
The default entry here is
i.e. an automatic reload is not car-
ried out.
7.5.2 Options
This setting possible here causes your device to carry out authentication negotiation for in-
coming calls, if it cannot identify the calling party number (e.g. because the remote terminal
does not signal the calling party number). If the data (password, partner PPP ID) obtained
by executing the authentication protocol is the same as the data of a listed remote terminal
or RADIUS user, your device accepts the incoming call.
7 System Management
bintec elmeg GmbH
64
be.IP 4isdn
