Note
After switching to the media gateway operation mode you can find an adequate docu-
mentation of the software in the manual of the be.IP 4isdn.
Case 1: If the password has not yet been changed, you can select the operating mode
once you log in.
CAse 2: If the password has been changed, the device has been configured as a telephone
system ex works. You can also change operating mode in the menu Assistants+First
Steps->Operating Mode. Note that some features will not then be available. Assembly
and the basic configuration are exactly the same.
Note
If you switch from telephone system to media gateway or from media gateway to tele-
phone system, the device does a factory reset. This means that the device reverts to
condition it was in when it was supplied. The configuration is deleted and all the pass-
words are reset.
Provider selection
After the first login to the web interface you are given the option to choose your Internet
provider.
If you want to configure a connection provided by Deutschen Telekom, follow the steps of
the Initial operation Telekom menu. Clicking Apply takes you through the individual steps
(see also the installation poster section First time use with the initial operation menu).
If you want to configure a connection offered by a different provider, you are taken to User
view of the status page of your device. If you click on one of the
buttons, you are taken
to the corresponding configuration assistent.
2.4 Support-Information
If you have any questions about your new product, please contact a local, certified retailer
for prompt technical support. Resellers have been trained by us and receive privileged sup-
port.
Further information on our support and service offers can be found on our web site at
.
2 Introduction
bintec elmeg GmbH
10
be.IP 4isdn
