Field
Description
Select the event to trigger an email notification.
Possible values:
•
0+ *
(default value): A Syslog mes-
sage includes a specific string.
•
92 9!7 , 13
: A new adjacent AP has been
found.
•
92 ?3 , 13
: A new Rogue AP has been found,
i.e. an AP using an SSID of its own network, yet is not a com-
ponent of this network.
•
92 + , "8)# 13
: A new unconfigured AP has
reported to the WLAN.
•
. , 11+
: A managed AP is no longer access-
ible.
Matching String
You must enter a "Matching String". This must occur in a syslog
message as a necessary condition for triggering an alert.
The entry is limited to 55 characters. Bear in mind that without
the use of wildcards (e.g. "*"), only those strings that correspond
exactly to the entry fulfil the condition. The "Matching String"
entered therefore usually contains wildcards. To be informed of
all syslog messages of the selected level, just enter "*".
Severity
Select the severity level which the string configured in the
Matching String field must reach to trigger an e-mail alert.
Possible values:
*0
(default value),
,+
,
%*+
,
,
8
,
9*
,
1
,
-73
Monitored Subsystems
Select the subsystems to be monitored.
Add new subsystems with Add.
Message Timeout
Enter how long the router must wait after a relevant event be-
fore it is forced to send the alert mail.
Possible values are
to
. The value
disables the
timeout. The default value is
.
19 External Reporting
bintec elmeg GmbH
408
be.IP 4isdn