Field
Description
Possible values:
•
7+
(default value): NAT Traversal is enabled.
•
-7+
: NAT Traversal is disabled.
•
'*
: The device always behaves as it would if NAT were in
use.
Only for
= 1+
The function is enabled with
7+
.
The function is enabled by default.
CA Certificates
Only for Phase-1 (IKE) Parameters
Only for Authentication Method =
-, 3
,
?,
3
or
?, *0
If you enable the Trust the following CA certificates option,
you can select up to three CA certificates that are accepted for
this profile.
This option can only be configured if certificates are loaded.
14.1.3 Phase-2 Profiles
You can define profiles for phase 2 of the tunnel setup just as for phase 1.
In the VPN->IPSec->Phase-2 Profiles menu, a list of all configured IPSec phase 2 profiles
is displayed.
In the Default column, you can mark the profile to be used as the default profile.
14.1.3.1 New
Choose the New button to create additional profiles.
The menu VPN->IPSec->Phase-2 Profiles->New consists of the following fields:
Fields in the Phase-2 (IPSEC) Parameters menu.
Field
Description
Description
Enter a description that uniquely identifies the profile.
bintec elmeg GmbH
14 VPN
be.IP 4isdn
259