Field
Description
•
*+;
•
0
•
!*
•
*
The default value is
/ 1
.
Protocol
Select a protocol.
The
,0
option (default value) matches any protocol.
Type
Only for Protocol =
%.
Select the type.
Possible values:
,0
,
*! +0
,
- 3*!
7+
,
3* J3*!
,
?*
,
*!
,
) 6*
,
)
,
) +0
.
See RFC 792.
The default value is
,0
.
Connection State
With Protocol =
)%
, you can define a filter that takes the
status of the TCP connections into account.
Possible values:
•
7+!
: All TCP packets that would not open any new
TCP connection on routing over the gateway match the filter.
•
,0
(default value): All TCP packets match the filter.
Destination IPv4 Ad-
dress/Netmask
Enter the destination IPv4 address of the data packets and the
corresponding netmask.
Possible values:
•
,0
(default value): The destination IP address/netmask are
not specified.
•
>
: Enter the destination IP address of the host.
•
92B
: Enter the destination network address and the cor-
responding netmask.
Destination IPv6 Ad-
dress/Length
Enter the destination IPv6 address of the data packets and the
prefix length.
bintec elmeg GmbH
11 Networking
be.IP 4isdn
173