Binder KBF P 240-UL, Перевод оригинального руководства по эксплуатации

Страница: 71 / 189

KBF P + KBF LQC + KBWF (E6) 11/2016 page 71/189
Programming in the “step” mode allows only two kinds of temperature and humidity transitions:
•
Programming gradual changes of temperature and humidity (ramps) is impossible in the “step” mode
•
Program sections with constant temperature and humidity
The setpoints (target values) of two subsequent program sections are identical; so the temperature
and humidity remain constant during the entire duration of the first program section.
•
Sudden changes of temperature and humidity
The entered setpoint of the section is reached as fast as possible and then held constant for the re-
maining section duration.
Selecting the setting “Ramp” or “Step”
Section view (partial view).
In the field “Course” select the desired setting “Ramp”
or “Step”.
“Ramp” and “Step” mode example (representation of a temperature course)
W/°C
t/min.
0
20
40
60
80
100
10 30 40 60 70 100 130
1 2 3 4 5 6 7 8
Corresponding program table
Section No.
Duration
[hh:mm:ss]
Temperature
[°C]
Humidity
[% rH]
Fan
[%]
Ramp or Step
1 00:10:00 40.0 xxxx xxxx Step
2 00:20:00 60.0 xxxx xxxx Step
3 00:10:00 80.0 xxxx xxxx Step
4 00:20:00 40.0 xxxx xxxx Step
5 00:10:00 40.0 xxxx xxxx Ramp
6 00:30:00 80.0 xxxx xxxx Ramp
7 00:30:00 80.0 xxxx xxxx Ramp
8 00:00:01 20.0 xxxx xxxx Ramp