Bilanciai D400, Инструкция по использованию, обслуживанию и монтажу

Страница: 41 / 59

14.3 Repeater scale
14.3.1 Setup Menu/Scale/Repeater scale parameters/Serial
port/String
All the parameters listed below must be selected in the same way as
they were for the main terminal. Consult par. 14.2.1 on page 3-26 .
Enter the following parameters: CB
✔
unit of measurement: kg,g,t,lb;
✔
division: 0.001, 0.002, 0.005, 0.010,
0.020, 0.050, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5,
1, 2, 5, 10, 20, 50.
Enter the following parameters: Visual
✔
unit of measurement: kg,g,t,lb;
✔
division: 0.001, 0.002, 0.005, 0.010,
0.020, 0.050, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5,
1, 2, 5, 10, 20, 50.
Enter the following parameters: Extended
✔
ranges: SINGLE, TWO MULTIDIVISION,
TWO MULTIEXTENSION, THREE
MULTIDIVISION, THREE
MULTIEXTENSION;
✔
division: 0.001, 0.002, 0.005, 0.010,
0.020, 0.050, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5,
1, 2, 5, 10, 20, 50;
✔
capacity: enter the numerical value as
explained in the Use of the terminal chapter
of the user manual;
✔
1
st
range capacity: as above;
✔
2
nd
range capacity: as above.
D400
3-41