Bilanciai D400, Инструкция по использованию, обслуживанию и монтажу

Страница: 45 / 59

Follow the menu path:
Italian>Upgrade>Serial line>Software upgrade via
serial line... CAUTION: the program will be deleted;
have upgrade ready.
CONTINUE?> YES
Premendo il tasto selezionare
kermit protocol
.
The terminal launches a new program (boot program) that allows you to
install the new firmware.
The terminal will give the following instructions:
Connect com01 to host, select kermit protocol, 38400,
8, N, 1
(Connect host with Kermit protocol to com1, configuration
38400, 8, N, 1)
The terminal will set on hold and give the
.waiting
message,
cancelling the program it contains..
Transmit the file with the new software version from the PC by means of
the Kermit procedure.
On receiving the file, the terminal displays the message
.loading
.
On completion of the transfer procedure the terminal displays
.correctly terminated: switch off.
(transfer completed
successfully; switch off the terminal).
Should any error messages be displayed notify Assistance Service.
Switch the terminal off and then on again before using the new software.
D400
3-45