Bilanciai D400, Инструкция по использованию, обслуживанию и монтажу

Страница: 36 / 59

Progressive
calibration (1, 2, , n) The weight and weighing symbols initially
appear on the display. Remember that angle
calibration usually occurs before sampling,
thus the weight value that appears on the
display is not real but only indicative of the fact
that there is something on the scale.
Proceed in the following way:
unload the scale and press
READY
; after 30
seconds (the time required for the scale to
stabilize) the positions of the digital cells in
the system will appear on the display. Each
digital cell is represented by a rectangle
and an identification number. The empty
rectangles indicate cell stability.
✔
If they are not addressed, the cells will be
arranged in sequence without identification
number. This display remains for the time
required to acquire the minimum dead load
of all the cells and then returns to the
normal weight display.
✔
Load the sample weight on cell 1 when the
Load the cell 1
indication appears on
the display;
press
READY
to acquire the sample weight
value. After this, the cell positions in the
system are displayed again.
This display remains for the time required
to acquire the weight on all cells when cell
1 is loaded with the sample weight;
✔
D400
3-36