Biketec AG Flyer, Руководство по эксплуатации

Страница: 32 / 94

28
POWER
km/h
km/h
0000
0
Power
Assist
Mode
The display panel
Deleting all data
To do this, hold down both “Mode” buttons
and the “Overall reset” button on the rear of
the display at the same time for approx. three
seconds.
Setting and saving language, contrast and
wheel size
By pressing the buttons “Mode” and “Down-
ward arrow” you can enter the screen pro-
gramming section. Here you can set the
desired levels as described in the separate
instructions. You can select from five possible
languages. The contrast can be varied in ten
steps. The wheel size can be set here in 1 mm
steps (10 mm - 3999 mm). To save the settings,
please press the light button.
Background lighting and light.
In order to switch the back-lighting of the
screen on or off, simply apply the “Light” button.
In order to switch the pedelec light on or off,
simply apply the “Light” button.
For enhancing your safety, we recommend
riding with lights on.
Automatic switch off
If your FLYER does not move
for ten minutes after stopping,
the system turns off automatically. If you
would like to ride with support once more,
you have to press the “Power” button on
the screen once again.
10.2.1 Measurement and display ranges
Description Display range
Speed 0,0 - 99,9 km/h
Trip
0.0 – 99999 km (When
the distance ridden
reaches 9999.9 km, the
display shows the dis-
tance without a decimal
point.)
Average speed 0 - 99,9 km/h
Highest speed 0,0 - 99,9 km/h
Total distance
0.0 – 99999 km (When
the distance ridden
reaches 9999.9 km, the
display shows the dis-
tance without a decimal
point.)