Biketec AG Flyer Скачать руководство пользователя страница 22

Страница: 22 / 94

The battery

Safety information about your

FLYER battery:

• This battery is exclusively intended

for use in FLYER electric bikes.

• Only use the FLYER charger for

charging the battery

• Do not overheat the battery

• Do not throw the battery in a fire

• Do not dismantle or modify the battery

• Do not hit nails into the battery

• Do not connect the (+) plus and (-) mi-

nus poles with metal objects

• Do not charge or use the battery in

high temperatures

• The reasons named above can cause

heat, fire or explosions.

• The battery has to be disposed of in

an environmentally-friendly way.

• Do not partially or completely im-

merse the battery in water.

• Do not expose the battery to a jet of

water.

• Do not use the battery when the hous-

ing has been damaged or opened.

• Only use original FLYER batteries.

8. The battery

There are two systems available for your

FLYER. One with 26V and one with 36V.

These two systems are not interchange-

able. In other words, you may not charge or

operate a battery from the other system in your

FLYER.

The battery of your FLYER 26 volt system is

a Li-Ion Ni Co manganese battery.

An even more state-of-the-art Li-Ion Al

battery is used in the 36 Volt system. This com-

bines the most advantages for use in a FLYER.

The main advantage of this type of battery is its

combination of low weight and large capacity.

You therefore save on weight but still enjoy a

higher battery capacity.

Both batteries are original Panasonic sys-

tem components and the vital charging and

monitoring electronics (battery manage-

ment system) have been optimally tuned to

8.1 Recharging the battery

The battery for the electrical motor of the

FLYER is located in a holder in the seat tube

below the seat.

8.1.1 Removing the battery

To charge the battery, it has to be removed

from its holder in the FLYER. To do this, take

the handle of the battery in your hand, place

the key in the battery lock and turn it

anti-

clockwise.

Range (km)

Lead

NiCd

NiMH

Li-Ion

Li-Po

Range with same battery weight

the drive system and the original charger

by the manufacturer. The cells employed

are specifically designed for use in electric

bikes. This ensures that the batteries de-

liver optimal safety, capacity, long life and

the widest possible operating temperature

range.

Содержание Flyer































































































Результаты поиска

Содержание Flyer

Отзывы:

Похожие инструкции для Flyer

Бренды по названию

Популярные бренды

Biketec AG Flyer, Руководство по эксплуатации

Результаты поиска

Содержание Flyer

Отзывы:

Похожие инструкции для Flyer

Бренды по названию

Популярные бренды