Biketec AG Flyer Скачать руководство пользователя страница 75

Страница: 75 / 94

• You should never leave

children in the child seat of a

parked pedelec unattended. If

the pedelec falls over, the child can

be seriously injured.

• Before every ride, please fold the

kickstand back in.

• Only use trailers which sat-

isfy the requirements of the

applicable national legal guide-

lines. Using unpermitted trailers can

lead to serious falls and injuries.

• The handling of the pedelec is nega-

tively influenced by using a trailer.

You should therefore adjust your rid-

ing style accordingly. Otherwise there

is a danger that the trailer could flip

over or come off, which can lead to

very serious falls and accidents.

• Practice setting off, braking, riding

around corners and on hills in a safe

place with an empty trailer.

• The weight of the trailer is also in-

cluded in the calculation for the high-

est permissible overall weight.

• You may require a substantially long-

er braking distance to stop when rid-

ing with a trailer. Please take this into

account in order to avoid accidents.

• Ask your specialised dealer about

the maximum permissible weight

of the trailer you may tow with your

Flyer.

The handlebars or stem may

not be damaged by attaching

the basket.

• The basket may neither cover head-

lights nor front reflectors.

• The brake and gear cables may not

be folded or restricted in their move-

ment by attaching the basket.

• The basket can carry a maximum

load of five kilograms.

• Please note that a basket can influ-

ence the handling of the bike.

Please inform yourself about

the applicable national guide-

lines before you use a trailer,

e.g. to transport children!

26.2 Kickstand

26.4 Basket

26.3 Bike trailer

Содержание Flyer































































































Результаты поиска

Содержание Flyer

Отзывы:

Похожие инструкции для Flyer

Бренды по названию

Популярные бренды

Biketec AG Flyer, Руководство по эксплуатации

Результаты поиска

Содержание Flyer

Отзывы:

Похожие инструкции для Flyer

Бренды по названию

Популярные бренды