Biketec AG Flyer, Руководство по эксплуатации

Страница: 76 / 94

72
26.5 Bar ends
Bar ends always have to
be attached to the han-
dlebars with the correct
torque, otherwise this can cause falls.
Before fitting the bar ends, please in-
form yourself whether the add-on has
been approved by the handlebar manu-
facturer, as only then may the bar ends
be fitted.
• Only use rear carries which
satisfy the requirements of the
applicable national legislation
for transporting your bike by car. Us-
ing unpermitted rear carriers can re-
sult in accidents.
• Adjust your driving according to the
weight of your rear carrier.
Check that the pedelec is properly fas-
tened at regular intervals during trans-
port. If your pedelec falls out of the
carrier, it can cause serious accidents.
Please note that loose parts, such
as tools, luggage and tool bags, child
seats, air pumps etc. could fall off dur-
ing transport. Other road traffic par-
ticipants could be endangered by this,
so you should remove all loose parts
from the pedelec before beginning
transport.
A roof rack changes the total height
of your vehicle.
Accessories and equipment
27. Car roof rack and rear carrier
• Do not transport your pe-
delec upside down. Only secure
the pedelec on the handlebars
stem, seat or seat post if this is in-
tended by the manufacturer of the
carrier. When securing the bike, en-
sure that no damage is caused to the
fork or the frame.
• You may not attach your pedelec to
the roof rack or rear carrier by its
crankset. The pedelec always has
to be transported standing on its
wheels. The only exception to this
is if the carrier stipulates a differ-
ent type of transport. Not adhering
to this could cause damage to the
frame and fork.
• When transporting the pedelec by
car, the battery has to be removed
and transported separately.
Inform yourself online on the website
of the respective manufacturers about
assembling and using add-on parts and
accessories for your pedelec. A list of
links is printed in chapter 31.