OPERATION MANUAL
Manual
Roll
Lam 120W;
Roll
Lam 140W;
Roll
Lam 160W 13
Generally less tension is better to avoid the laminated picture
bending. Furthermore the regulation of the braking effect has to
be done from both sides equally. In the
case of a one sided o-
peration of the brakes, the film can switch on the supply shaft
what can lead to wrinkles.
ADVICE: When loading the film tighten the brakes a little bit
stronger. As soon as the film is optimally adjusted loosen
the brakes!
Picture 6
Quick gripping cones with inte-
grated brake mechanism
5.3 Quick gripping cones
Besides the regulation of the tension of the film the quick gripping
cones allow the positioning (right and left shift) of the film. When
loading the film onto the supply shaft leave a gap of 5 mm be-
tween the clamp and the braking wheel (B) to ensure the possibil-
ity of the repositioning of the film. Thus if required the film can be
shifted to the right or to the left to correct a potential warp which
can occur during loading the film onto the supply shaft.
Picture 7
Positioning of the film
A
B