OPERATION MANUAL
9. Push the laminating film with the double sided adhesive film
evenly between the rollers by using the threading board so
that the film is tight without wrinkles. If necessary regulate the
tension of the film with the aid of the brakes on the cones.
10. Lower the top roller (6) until it touches the threading board.
Run the threading board through the rollers.
11. As soon as the threading board comes out the back of the
laminator
lower the top roller (6) and adjust the pressure
according to the thickness of the picture (see p.12).
12. Re-install the working table (8).
13. Run the picture through the rollers and start with the
lamination and coating process.
Manual R
oll
Lam 120W;
Roll
Lam 140W;
Roll
Lam 160W 26