Bexen REANIBEX 300, Руководство пользователя, Страница: 28 / 102

DIH 0300 B – USER GUIDE REANIBEX 300 14
2 DESCRIPTION OF THE EQUIPMENT
Figure 8: Automated Defibrillator programmable buttons
x
ECG Mode
In the ECG mode is not allowed to make any changes in operation parameters. In this mode it is shown a
non diagnostic ECG signal from lead II and the heart rate value. When in ECG mode, the discharge
capacity is disabled.
2.4
MENU OPTIONS
Certain parameters can be set up while working with the various operating modes of the REANIBEX 300.
The MENU button on the user interface can be used to access these options. The meaning of the
programmable buttons are located under the display varies according to the operating mode in use.
x
Manual Defibrillator Mode
When the MENU button is pushed in this mode, the options shown in the programmable buttons can be
used to change to AED or ECG mode. The ECG mode will be only enabled if there are no electrodes
connected and the patient cable is connected on the equipment
Figure 9: Manual Defibrillator mode menu options
x
Automated Defibrillator Mode
When the MENU button is pushed in this mode, the options shown in the programmable buttons can be
used to change to Manual mode.
Figure 10: Automated Defibrillator mode menu options
x
ECG Mode
When the MENU button is pushed in this mode, the options shown in the programmable buttons can be
used to change to AED or to Manual mode.
Figure 11: ECG mode menu options