Bexen REANIBEX 300, Руководство пользователя

Страница: 15 / 102

DIH 0300 B – USER GUIDE REANIBEX 300 1
1 INTRODUCTION
1 INTRODUCTION
The REANIBEX 300 is a portable, lightweight Defibrillator designed to carry out advanced monitoring and
resuscitation functions. It offers three operating modes: Manual Defibrillator, Automated Defibrillator and
ECG Mode.
This guide contains the instructions necessary for safe and appropriate use of the equipment, as well as
information on its configuration and maintenance. The guide includes the information and procedures for
all the features of the REANIBEX 300. The device you have purchased may not have all the features
contained in this manual.
Ensure that you are familiar with the features and operation of the REANIBEX 300 before using the
device.
WARNING
Some accessories of the REANIBEX 300 are not interchangeable with the accessories used in other
REANIBEX equipment. Incompatibilities between accessories are included in this manual.
1.1
OVERVIEW
The REANIBEX 300 offers several operating modes:
x
Manual Defibrillator Mode - Recommended for manual defibrillation and monitoring of vital
signs.
x
Automated Defibrillator Mode - Recommended for analysis of the ECG signal and defibrillation,
if required. It guides the user through the operating protocol.
x
ECG Mode - Available if the equipment has the patient cable connected to the equipment and
always from Manual mode (with electrodes no connected to the equipment). This mode provides
a no diagnostic ECG display from the lead II. When in ECG mode the discharge capacity is
disable.
x
Configuration Mode - This mode may be used to carry out manual tests, to configure the
various operation modes, to access the information stored on the internal memory and to carry
out maintenance functions.
x
Demo Mode - This mode is used to demonstrate the equipment operation displaying simulated
waveforms. This operating mode can only be accessed through the maintenance options of the
Configuration mode.
x
Auto-training mode – This mode allows work education and training in the use of the equipment
by simulating predefined usage scenarios (for more information see “REANIBEX 300/500 User
manual – Training options”). This operating mode is only accesible if you have installed the
training battery (DIS 3200 A).
If required, the Manual Defibrillator mode may be used to apply a defibrillation discharge following three
easy steps:
1. Charge
2. Apply the discharge.
The selection of the energy to be applied during the Manual mode should be done from Configuration
mode. During Manual mode the user can not select the value of the energy.