Beta Enduro RR 350 2013, Руководство по ремонту

Страница: 86 / 134

2
84
E
N
G
IN
E ASS
E
M
B
LY AN
D CO
NTRO
LS
Blocking inner hub with specific tool Code
0061400400.
Complete clutch and recommended tightening order.
To unscrew the nut 8 , the inner hub must
be blocked with a relevant tool A (code
0061400400); the tightening torque is fi-
xed at 120Nm after having applied medium
strength threadlocker.
Having tightened the nut, bend to two blo-
cking flaps on the safety plate.
Lubricate the clutch disc with gearbox oil
and apply the washer 1 in the seat on the
drum, the disc* spring 2 so that the concave
part faces the washer 1, the washer 3, the
special disc 4, a driven disc and then the
other discs alternating a driving disc and a
driven disc.
Insert the overall thrust bearing
9
(after ha-
ving lubricated it with gear oil) in the hole
on the main gearbox shaft and check its free
axial sliding. Close the clutch unit by me-
ans of the clutch pressure cap 3 , the four
springs 13 , the fours spring retainers 14 and
the four screws 15 , to be tightened with a
torque of 10Nm, in a criss-cross pattern.
III
I
IV
II
A
8
10Nm
* Refer to the exploded view of the clutch unit for
assembly.
Juddere spring assembling.
3
2
4
1
120Nm