Beta Enduro RR 350 2013, Руководство по ремонту

Страница: 17 / 134

1
15
ENGI
N
E DIS
A
S
SEM
BL
Y
Cylinder removal.
Removal of elastic ring 4 from right hand side of pi-
ston.
Pin bolt removal.
1
3
4
5
B
A
2
DISASSEMBLING CYLINDER
AND PISTON
Lift up the cylinder 1 a few centimetres, re-
move the two centring bushes 2 (both loca-
ted on the chain side) to prevent them from
falling inside the crankcases and continue
on removing the cylinder. Remove the cylin-
der gasket 3 .
Place a clean cloth between the piston and
the crankcase to keep foreign objects or
simple residue from falling inside the base.
Using a suitable tool to insert the specific
seat A , remove the elastic ring 4 on the right
hand side* of the piston 5 .
ATTENTION: be careful not to drop the ela-
stic ring inside the engine.
From the left hand side of the piston, push
the pin bolt with an aluminium cylinder B
(or the likes), until the pin bolt is freed from
the foot of the connecting rod.
Remove the piston.
ATTENTION: Try pulling out the pin bolt by
hand first of all. If it is too tight, hit the pin
lightly with a rubber hammer, at the same
time holding the piston with your hand in
order not to stress the connecting rod.
1
.1 .5
*
Referred to normal direction of vehicle.