Beta Enduro RR 350 2013, Руководство по ремонту

Страница: 60 / 134

2
58
E
N
G
IN
E ASS
E
M
B
LY AN
D CO
NTRO
LS
Make sure the distance A between the outer
faces of the fork is not less than that indicated
below:
Minimum acceptable distance: 4.25mm
Check to make sure that the inside diameter
D
of the fork pin seats is below the limit:
Fork inside diameter limit: 13,83mm
Make sure that the fork pins upon which
they slide have an outside diameter above
the limit (to be measured in the sliding are-
as of the forks and in the housing areas of
the crankcases):
Fork pin outside diameter limit:
13,75mm
Make sure that the desmodromic control
device has no corroded or worn areas espe-
cially in the grooves in which the drive pins
of the forks are engaged.
A
Di
Pin