Bercomac 700968-1-33V, Руководство пользователя

Страница: 23 / 60

Troubleshooting
21
Troubleshooting
PROBLEM POSSIBLE CAUSES CORRECTIVE ACTION
Snowblower vibrates or is abnormally noisy.
Damaged pulley Replace pulley
Damaged bearing Replace the bearing
Fan or the augers are damaged Remove and straighten or replace
the parts
Fan or auger bushings are worn Replace with new bushings
Snowblower bouncing up & down when
ingesting snow.
Augers are not positioned properly Make sure the ends of the 2 augers
are positioned 180 degrees from one
another when replacing shear bolts.
(See auger & fan shear bolt
replacement section in owner’s
manual)
Fan stops turning
Shear bolt is probably broken Replace shear bolt (see maintenance
section).
Auger stops turning
Shear bolt is probably broken Replace shear bolt (see maintenance
section).
Snowblower stops turning. Belt is probably damaged or broken Check and replace damaged belt
Belt is snapping, shredding, burning or worn
in a specific place
Snowblower was engaged when
plugged Make sure the augers and the fan are
not frozen or plugged before
engaging
Lack of tension on the belt
Adjust the tensioner spring or
replace spring if stretched.
Belts show premature wear
Not the original belts Always use the original belts
Worn belt, Belt may be worn
causing a slack. Inspect the belt. Replace if required.